Long Arm Star Drag for DAIWA [SD-ZEL-DA] (ltd ZPI collab)

Product Description

ZPI collaboration limited product!
A limited number of models have been produced to accommodate DAIWA reels with ZELOS machine cut star drags.

It has a larger diameter than standard genuine star drags and a long arm design for easier control of line slack.



Diameter: approx. 62.5 mm

Weight: approx. 9.5 g


Color Variations

Sapphire Blue	Sky Blue	Red
Royal Purple	Gold	Champagne Gold
Gunmetal	Black

Installation Method

The adjustment washers shown here may or may not be necessary depending on the individual differences and compatibility of the reel.
They are common adjustment parts used when installing any maker's star drags and handles, so you may not need them when installing long-arm star drags. Still, it may be useful to have them as a spare.


(Group A) When the genuine star drag is an SCL (screwless) star drag



Remove the drag nut, spring, and factory star drag and replace them with a long-arm star drag.

*The height of the SCL star drag remains constant (at the highest position closest to the handle) even when the drag is turned. Still, when it is replaced with a long-arm star drag, the height of the star drag will change depending on how tight it is.。


(Group B) When the genuine star drag is the standard star drag



Remove the stock star drag and handle collar, and replace them with a long arm star drag.

*The following handle adjustment washer may be required for models with the arrow handle collar installed.
If the handle is not secured even after tightening the handle lock nut, please purchase an additional handle adjustment washer and set it under the handle.



Handle adjustment washer for DAIWA (M8 standard) Thickness: 0.5 mm


*Other adjustment methods



Suppose the drag becomes partially locked even after replacing it with a long-arm star drag. In that case, the following adjustment washers can make it tighter.
Please set them under the star drag.

*The number and thickness of washers may vary depending on individual reels. Still, please overlap the washers so that the total thickness is approximately 1.0 mm - 1.5 mm.



P-WA I.D. 8mm x O.D. 12mm x Thickness 0.50mm Brass adjusting washers, set of 2


P-WA I.D. 8mm x O.D. 12mm x Thickness 1.00mm Brass adjusting washers, set of 2


Compatible Models

(Group A)

- IM Z LIMITBREAKER TW HD-C

- 22 STEEZ A II TW
- 21-22 STEEZ LTD SV TW
- 21 STEEZ A TW HLC
- 20 STEEZ AIR TW　*1
- 19 STEEZ CT SV TW
- 17 STEEZ SV TW
- 17 STEEZ A TW

- 22 ZILLION TW HD
- 21 ZILLION SV TW
- 18 ZILLION SV TW
- 18 ZILLION TW HLC 1516

- 22 TATULA TW 80
- 20 TATULA SV TW
- 19 TATULA TW
- 17 TATULA SV TW

- 21 ALPHAS SV TW
- 20 ALPHAS AIR TW

- 22 Silver Creek AIR TW STREAM CUSTOM

- 23 SS AIR TW

- 23 SALTIST SV TW 80 PE SPECIAL

- 22 SILVER WOLF SV TW PE SPECIAL

- 21 GEKKABIJIN AIR TW PE SPECIAL

- 19 morethan PE TW

- 18 RYOGA 1000
- 18 RYOGA 1500

- 18 CATALINA TW

- 21 BASARA IC 150

- 20 HRF PE SPECIAL
- 18 HRF SONIC SPEED

- 21 KOHGA IC
- 18 KOHGA TW HYPER CUSTOM
- 18 KOHGA IC
- 17 KOHGA TW

- 21 SALTIGA IC 100

- 23 ADMIRA
- 20 ADMIRA A100

- 21 TIERRA A IC
- 20 TIERRA IC

*1 One Brass adjusting washers are required.


(Group B)

- 14 STEEZ LTD SV TN
- 14 STEEZ LTD SV
- 13 STEEZ SV
- 07 STEEZ

- 20 ZILLION 10 SV TW
- 18-19 ZILLION TW HD
- 16 ZILLION TW HLC 1514
- 15 ZILLION TW
- TD ZILLION J-DREAM
- 09 TD ZILLION 7.3LTD
- 08 TD ZILLION PE SPECIAL
- 07 TD ZILLION P,H,SH

- 17 TATULA 100
- 15 TATULA HLC
- 14 TATULA 103
- 14 TATULA HD CUSTOM

- 19 ALPHAS CT SV
- 18 ALPHAS AIR STREAM CUSTOM
- 16 ALPHAS AIR
- 15 ALPHAS SV

- 18 SV LIGHT LTD
- 14 SS AIR
- 13 SS SV

- 13 T3 MX
- 13 T3 SV
- 12 T3 AIR
- 11 T3

- 00 TD-Z
- 00 TD-Z HL

- 18 deps LIMITED
- 16 BLACK LTD
- 10 DAIWA Z

- 14 morethan PE SV

- 14 RYOGA BJ
- 10 RYOGA 1000
- 09 RYOGA 2020

- 16 HRF PE SPECIAL

- 19 BASS X
- 17 FUEGO CT
- 08 AGGREST

- Megabass IS
- Megabass IP
- Megabass FX
- Megabass LIN


Gallery